2005 CBI 6800T Track Horizontal Grinder, Cat 3412 Engine with 1000 HP, Only 7,566 Hours, Undercarriage is 80% Wireless Remote Control, Few Hundred extra Teeth, Discharge Conveyor with Magnetic Pully, No Compressor, Ready for Grinding. Transport width: 11' 1" Transport length: 43’-2” Weight 89,500lbs - 95,000lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 ASV Supertrak SK190TR w/ Shearex mulching head. 190 HP Cummins Engine with 363 hours. High Flow Hydraulics and A/C. Weight: 13,000 lbs Height. 90” Width. 78” Length: 163” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Bandit SG40 Stump Grinder, Kohler 38 hp EFI Gas with 238hours, New Belts, 18” diameter x 1/2 thick New Revolution cutterwheel with 47” swing, Adjustable rubber tracks. L 100.5” W 29” H 48” Lbs 1,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 3680 Beast Recycler with a Cat C15.565 hp Engine with 4,800 hours. Radio Remote and Magnetic pully. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Bandit 3680 with Cat 3412 860hp, with 8,000 hours. Radio remote, and Magnetic head pulley. Redone summer of 2021. Ran sept 21-March 22 parked until June 22 did a 3 week job then parked until November 22. Ran until March 23. Newer floor, Frame restructure, All hydraulic cylinders and hoses replaced. Hydraulic tank drained and cleaned. New: Clutch, Drive belts, Starter, Anvil, 2 augers and bearings and chain, Discharge top bearings and motor. Length: 44’ Width: 10’10” Height: 13’ 6” Weight: 62,500 lbs. Fuel Tank: 400 gal. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 3090 4,600 hours on the Cat C18 765 HP Engine, Tires are 11R x22.5 length of unit 39'7" width 9'9" Height 12'4" weight 54000 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Bandit Model 3090 Track Whole Tree Chipper, Only 500 Original Hours, Volvo Turbo 800 HP Diesel Engine, 24" Whole Tree Chipper 26" x 36", 6 Knife Chipper drum, Opening, Air Compressor, Undercarriage is 99%, Radio Remote Control System, 7-1/2' Infeed Conveyor, Hydraulic Discharge Chute for Discharge Ready to Chip. Length: 33’ 6” Width: 11’2” Height: 12’ 3” Weight: 59,000-62,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Bandit 3590 Whole Tree Chipper, Equipped Currently as a Micro Chipper, Can be Changed, C-27 875HP TIER 2 Engine, NO DEF, Has Original 5200 Hours, Smaller Air Compressor Attached, Wireless and Tether Cord Remote Control, More Pictures Coming. Weight 76,000 lbs Length: 43' 5" Width: 11' 10" Height: 12’ 6” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2011 Bandit Beast Model 3680, Caterpillar Model C-18 765 HP Turbo Diesel with Only 2,300 Original Hours , Magnetic Head Pulley on Discharge Conveyor, , Air Compressor, Wireless Remoter Control,and Tether Cord Control, Autofeed Reverse System, Tri-Axle Unit with Hydraulic Tongue Jack with Air Brakes... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 3680 Beast Recycler, C15 cat 545 HP Non-emissions engine with 9284 hours Radio Remote, Magnetic Head Pulley, 5th Wheel, Bandit rebuilt the mill area in 2019. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Bandit 3680 Horizontal Grinder, Cat H18 Engine, Wireless Remote Autofeed System, Fold Up Track. Needs Radio Remote. Ready to grind. Length: 44’ Width: 10’10” Height: 13’ 6” Weight: 62,500 lbs. Fuel Tank: 400 gal. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 3680 Horizontal Grinder with only 2,667 hours. Equipped with a 566HP Caterpillar engine. New tires, New set of teeth. Excellent condition. Length: 37’ 3” Width: 11’ 7” Height: 12’ 2” Weight: 85,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Bandit 3680 Beast Horzontal Grinder, Cat C27 with 2800 Hours, 30 Tooth Mill, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit Model 4680 Horizontal Grinder, Tri Axle Machine, Cummins 1000 HP Engine, Hours Unknown, Will have hours soon, Radio Remote Control, 4 " and New 2" Screens for Regrind. Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 4680 Beast Recycler, Cat 3412 1,000hp with 6,000 hrs, 30 Tooth Mill, Radio Remote, Magnetic Head Pulley Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 3,500 Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Bandit 4680T Beast Recycler Horzontal Grinder, Cat C27 with 7000 hours, Magnetic head pulley, Radio remote. Massive amount of cutting & replacing/fabrication. We replaced hoses, pumps, motors, rebuilt valve bodies. Also rebuilt the entire hood. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 1390 15 inch drum chipper with 142 hp Cat tier 3 engine winch lift cylinder (crusher) on top feed wheel. Auto feed, hydraulic swivel and height adjustable discharge chute. New tires, new knives and anvil 4,500 hours LENGTH (CLOSED): 188” LENGTH (OPEN): 218” WIDTH: 81” HEIGHT: 110” WEIGHT: 7,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 1390 15” Drum Chipper, 140 hp Cat Diesel, Winch, Auto feed, Lift cylinder, Hydraulic swivel and height adjustable discharge. Weight 7,500 lbs Length 188" Width 81" Height 110" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.