2005 CBI 6800T Track Horizontal Grinder, Cat 3412 Engine with 1000 HP, Only 7,566 Hours, Undercarriage is 80% Wireless Remote Control, Few Hundred extra Teeth, Discharge Conveyor with Magnetic Pully, No Compressor, Ready for Grinding. Transport width: 11' 1" Transport length: 43’-2” Weight 89,500lbs - 95,000lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 ASV Supertrak SK190TR w/ Shearex mulching head. 190 HP Cummins Engine with 363 hours. High Flow Hydraulics and A/C. Weight: 13,000 lbs Height. 90” Width. 78” Length: 163” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Bandit SG40 Stump Grinder, Kohler 38 hp EFI Gas with 238hours, New Belts, 18” diameter x 1/2 thick New Revolution cutterwheel with 47” swing, Adjustable rubber tracks. L 100.5” W 29” H 48” Lbs 1,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 3680 Beast Recycler with a Cat C15.565 hp Engine with 4,800 hours. Radio Remote and Magnetic pully. Weight. 62500 lbs. Width. 130 in. Height. 162 in. Length. 528 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Bandit 3680 with Cat 3412 860hp, with 8,000 hours. Radio remote, and Magnetic head pulley. Redone summer of 2021. Ran sept 21-March 22 parked until June 22 did a 3 week job then parked until November 22. Ran until March 23. Newer floor, Frame restructure, All hydraulic cylinders and hoses replaced. Hydraulic tank drained and cleaned. New: Clutch, Drive belts, Starter, Anvil, 2 augers and bearings and chain, Discharge top bearings and motor. Length: 44’ Width: 10’10” Height: 13’ 6” Weight: 62,500 lbs. Fuel Tank: 400 gal. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 1390 15 inch drum chipper with 142 hp Cat tier 3 engine winch lift cylinder (crusher) on top feed wheel. Auto feed, hydraulic swivel and height adjustable discharge chute. New tires, new knives and anvil 4,500 hours LENGTH (CLOSED): 188” LENGTH (OPEN): 218” WIDTH: 81” HEIGHT: 110” WEIGHT: 7,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 1390 15” Drum Chipper, 140 hp Cat Diesel, Winch, Auto feed, Lift cylinder, Hydraulic swivel and height adjustable discharge. Weight 7,500 lbs Length 188" Width 81" Height 110" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Bandit 1400 Whole Tree Chipper with 5,800 hours. Diesel Engine with 250 HP. Lots of new parts including a hydraulic overhaul and wiring overhaul. Runs and operates smoothly. Est. GVWR 18,000 lbs. Comes with extra msc. wear items. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Bandit 1425 Beast Recycler with Liquid Color Unit, Cat 125hp Diesel with 114hrs, 2” and 4” Screens. Width. 98 in. Height. 120 in. Length. 288 in. Weight. 12500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Bandit 1425 Horzontal Grinder, Cat 120hp with 73 hours, Radio Remote, Magnetic Pulley, Extra Parts, Excellent Condition. Weight 12,500 lbs Width 98 in Height 120 in Length 288 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Bandit 1590XP Drum Chipper with140hp John Deere Engine, winch, auto feed, lift cylinder, Ex municipal machine in very good shape. Length: 12' 6" Width: 8' 6" Height: 9' 3" Weight: 12,500 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Bandit 1590XP Chipper, Caterpillar Engine, NEW ENGINE, NEW TWIN DISC CLUTCH, Both from Caterpillar, 1500 Hours, Hand Crank Height and Hand Crank Swivel Chute, Lift Cylinder, Live Hydraulics, Autofeed, Hydraulic Winch, Ready for Work. Length: 16' Width: 7' 5" Height: 8' 8" Weight: 9,000 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 1590XP Chipper, Equipped with a Perkins/Cat 142 HP Turbo Diesel Engine, 4300 Hours, Hydraulic Winch, Hydraulic Lift Cyl, Autofeed System, New Tires, Ready for Work 15" Capacity. Length: 16' Width: 7' 5" Height: 8' 8" Weight: 9,000 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Brush Bandit 1590XP Chipper, Equipped with a Vortex V-6 Gasoline Engine, with 3,200 Hours, Autofeed System, Hydraulic Winch, Lift Cylinder, Hand Crank Swivel Chute and Height Adjustment, Ready for Work. Weight: 9,000 pounds (approximate) Length: 16' Width: 7' 5" Height: 8' 8" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 1850 Whole Tree Chipper Deere 325HP Turbo Engine, Engine had a complete engine rebuild 500 Hours Ago, 360 Degree Grapple Rotation, Heat and Ac in Cab Ac is not hooked up, ONLY 6,100 Original Hours, Joystick Controls. Length 282” Width 102” Height 156” Weight 20,000 lbs.

2008 Bandit 1890HD Chipper, Engine is a Cummins 213 Turbo Diesel, Tier 3, with 7400 Hours Showing, Hydraulic Winch, Hydraulic Swivel Discharge, Hand Crank Height Chute, 12000 Single Axle with (4) Tires, Twin Disc Clutch, Autofeed System,12 Volt Brakes, Live Hydraulics. Chipper Length 196.85 in Chipper Width 92.52 in Chipper Weight 9,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Bandit 18XP with 165hp V8 GM gas engine with 2200hrs, Winch and loaded with extras, Lift Cylinder, Hand Crank Turn and Height Adjustable Discharge. Length: 20’ 2” Width: 7’ 4” Height: 8’ 8” Weight: 9,700 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Bandit 1900 Track Whole Tree Chipper, Cummins 535 HP Engine, Has 3900 Hours, Joystick Controls/Foot Pedal, Several Extra Sets of Knives, Counter Knives and Anvil , Undercarriage 75%, Enclosed Cab with Heat and AC, AC needs a Charge, New Clutch Engagement Switch Ready for the Woods. Weight 66,500 lbs. Length 285” Width 130” Height 142” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2022 Bandit Model 19XPC Chipper, Equipped with a Caterpillar 175 HP Turbo Engine Only 700 Hours, Acrylic Paint, Autofeed , Hydraulic Lift Cylinder, Hydraulic Tongue Jack, Tandem 10,000 Lb Axles, 12 Volt Brakes, Customer getting a larger size machine, Ready for Work. Length: 20’ 9” Width: 7’ 9” Height: 9’ 2” Weight: 10,500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.