2005 Timbco 445EXL Feller Buncher, Includes a Quadco 22 360 Degree Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, Frame Hours 14,000 Engine Rebuilt at 13,700 Hours, New Head, New updated Saw Motor, New Pins and Bushings between Stick and Boom, New Starter, Main Boom Rebuilt, New Fuel System, New Turbo, Rotor Bearings Replaced Undercarriage between 75 and 80% Ready for the Woods. Weight 62,629 lbs. Length 25 ft 4 in. Width 10 ft 4 in. Height 12 ft 6 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timbco 445EXL Feller Buncher, Equipped with a Quadco 22" 360 Wrist Saw, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Good Undercarriage 70%, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2002 Timbco 425 Feller Buncher, Equipped with a Quadco 20" Fixed Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, New Final Drives, UC is 80-85%, Cummins 8.3 Diesel with 11000 Hours, New Windshield, Ready for the Woods. Weight 55,235 lbs Height 12 ft 2 in Width 9 ft 8 in Length 21 ft 4 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1993 Timbco 425 with Rolly-II Processor Head, 37" Bar Saw, New Air Bag in Head, Cummins 8.3 Diesel , Hours reading 6,769, Leveling Cab, Enclosed Cab with Heat and AC, Propac Heater, New Computer Sensor for Measurements ,No Oil Leaks or Engine Blow By , Final Drives Done Recently. Ready for the Woods... Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 Timbco 425C Equipped with a CTR Dangle Head Saw with 24" Bar Saw, Rebuilt Engine with 3000 Hours, Undercarriage is 40-45%. Tracks are Good, New Drive Rollers, Enclosed Cab with Heat and AC, Ready for the Woods. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Timbco 425C Equipped with a Waratah 624 Processor head and additional 620 Head, New Final Drives, New Hyd Pump, Hyd.Oil Cooler, Both Boom Cylinders Rebuilt, New AC Pump, Enclosed Cab with Heat and AC, New Encoder, NEW Undercarriage, 8,000 Hours, Ready for the Woods . Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timbco 425 EXL Feller Buncher Equipped with A Quadco 22" 360 Degree Saw Head, NEW Cummins Engine Installed, Under Factory Warranty, 7000 Frame Hours Undercarriage 80% Enclosed Cab with Heat and Air... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Timbco 425EXL with Logmax 7000 Processor Head, Hours are 8,000.00 Rebuilt Computer Measuring Device, Enclosed Cab with Heat and Air Conditioning, Undercarriage is 85% No Leaks, Tight Machine. Operating Weight 54,002 lbs Height - Top of Cab 12.4 ft Shipping Length - non tilt 14.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Timbco 425B Processor, Machine has Log Max 5000 Head, 15,000 Hours, Undercarriage is 50%, 404 Chain Pitch, Enclosed Cab with Heat Weight 55,235 lbs Length 21 ft 4 in Width 9 ft 8 in Height 12 ft 2 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1998 Timbco 425C Feller Buncher, Equipped with a Quadco 20" Saw Head, New Saw Disc with less than 200 Hours, 2400 Original Hours, Undercarriage is 75-80%, New Idlers, Pumps Rebuilt, Drive Motors Redone, New Hydraulic Cylinders Repacked on Saw Disc, Enclosed Cab with Heat and AC, Kenwood Surround Sound in Cab. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Timbco 425D with Logmax 7000 Processor Head, Enclosed Cab with Heat, Air is starting to go, Cummins 8.3 Engine, Unknown Hours, Undercarriage is around 75% Ready to Work. Length: 21 ft 4 in Width: 9 ft 8 in Height: 12 ft 2 in Weight: 55,235 lbs.

1995 Timberjack 450C Grapple Skidder, TD 40 Winch Included, Engine Cummins 5.9. Frame. Hours Unknown, Runs Good. Remaned Engine Low Hours, New Injection Pump, Tires are 28L x 26, Rear Tires are 90% Front Tires 25%, 1 Set of Multi Ring Chains, Ready for the Woods Weight: 30,000 lbs Length:20 ft Width:9 ft 4 in Height:9 ft 6 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Timberjack 460C Cable Skidder, Cummins 5.9. 13,400 Hours, Cable Enclosed Cab with Heat. Radio and COLD AC, Just redone AC at $3,800.00, New Radiator, Windshield, Tires are 24.5 x 32, Good Bear Claw Chains, Centers Tight. Length 23 ft 0 in Width 10 ft 1 in Height 10 ft 7 in Weight 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Timberjack 460D Single Arch Grapple Skidder, No Winch, Enclosed Cab with Heat, No Air Conditioning, NEW ENGINE With 2,000 Hours, Center Section as minor play, 30.5 x 32 Tires, Chains all around, Ready for the Woods. Length 23 ft 0 in Width10 ft 1 in Height10 ft 7 in Weight 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Timberjack 460D Grapple Skidder, No Winch, 10,400 Hours Tires are 30.5 x 32 Front are 50% Rear are 90%, Chains are 50% all around, New Injection Pump New Injectors. New Turbo, New Fan, New Hydraulic Cooling System and Pump, Grapple Repacked, New Fuel Lines, New Throttle Position Sensor, More Pictures Coming Soon, Ready for the Woods Weight 30,000 lbs Length23 ft 0 in Width10 ft 1 in Height10 ft 7 in

2004 Timberjack 460D Grapple Skidder, Machine has 18,830 Frame Hours, NEW ENGINE replaced at 14,020 Hours, Currently 4800 Hours on New Engine, Heat and Ac in Cab, New Hydraulic Pump, Lower Pins and Bushings done, Center has a little play, Ready for the Woods. Lenght 23 ft 0 in Width 10 ft 1 in Height 10 ft 7 in Weight 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Timberjack 360 Grapple Skidder, Includes Winch, Enclosed Cab with Heat and Air Conditioning, Good Centers, ORIGINAL HOURS 4,900, Chains, Machine is in Excellent Condition, Ready for The Woods. Length 23 ft 0 in Width 10 ft 1 in Height 10 ft 7 in Weight 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1990 Timberjack 380 Cable Skidder Cummins 5.9 Engine, Hours Unknown, 3 Speed Clark Transmission, Open Cab, Missing One Door, Lever Drive, Center Section is Tight, New Batteries, Drive Shaft has a gear broke, runs good. Weight 30,000 lbs Length 23 ft 0 in Width 10 ft 1 in Height 10 ft 7 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1995 Timberjack 380C Grapple Skidder, Winch, Need Drive Shaft for Winch, Cummins 12 Valve, Hours Unknown, Good Tire Tread, Center Section was done recently, More Pictures Coming, Ready for the Woods Length: 23 ft 0 in Width: 10 ft 1 in Height: 10 ft 7 in Weight: 30,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timberjack 1710D Double Bunk Forwarder, Engine has 18,000 Hours, Enclosed Cab with Heat and Air Conditioning, New Center Section, Machine is Ready for the Woods. Operating Weight 42,990 lb Length 35.6ft in Width Over Tires 10.47ft in Height To Top Of Crane 12.8ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.