Northtech 12" Resaw Model NT-HBR12V Self contained hydraulic pack

6” width capacity 8” thickness capacity 30 hp main motor, 1.4 hp feed motor 3 hp blower motor…460 volt 3 phase 559 rpm blade speed digital oiling

Works well Taken out of service and stored

Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 4th head: top horizontal spindle 15 hp, 208-230/460 volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, 208-230/460 volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, 208-230/460 volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Wadkin Visage Profile Grinder Manufacturer specs (to be confirmed): 2 Hp, 220 volt three phase, 60 hz Max cutter length (hydrolock) 355 mm (13") Max cutter length (Mechanical) 315 mm (12.4") Max cutting circle (Profiling) 350 mm (13.8") Max cutting circle (Straight knife) 300 mm (12") Min cutting circle 70 mm (2.75") Max cutting depth of profile 40 mm (1.5") Spindle speed 3600 rpm Adjustable axial grinding angles Machine work light Side template holder with micro-adjustment Turret style tracing pin head Front operator arm rest Swing type diamond tipped wheel dresser Push button motor controls Includes (1) 40" mm diameter grinder arbor

Six Wadkin moulders available. Have not been run in a few years. Selling all as one package. - (4) 4-Head machines - (2) 6-Head machines

This machine is no longer needed at the current facility. Ready to load. Wadkin NNV-C Profile Grinder 3-phase Specification VISAGE - With bilateral linear action providing profiling and straight knife grinding up to a max of 335 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 335 mm. Max dia of cutting circle 350 mm. Includes arbor, grinding wheel, stylus, etc. Also included Carriage locks; Washdown facility. - per seller: Arbor on the machine itself is 1 1/4" we have a spacer we use on grinding wheels if we need to adapt them to our size arbor. Yes there is a dresser on the machine.

Manufacturer’s Specs Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460)volt three phase drive motor - 4th head: top horizontal spindle 15 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, [208-230/460](tel:208-230/460) volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, [208-230/460](tel:208-230/460) volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Wadkin Profile Grinder as pictured

7 Spindle Moulder with Manual Bed Lubrication 6000 RPM Spindle Speed 19-91 F/Min Feed Speed Will Take 7" x 5" Lumber Specs: 1ST BOTTOM--7.5 HP 1ST FENCE SIDE--7.5HP 1ST LH SIDE--10HP 2ND FENCE SIDE--7.5 HP 1ST TOP-15HP 2ND BOTTOM-10HP UNIVERSAL-7.5 HP FEED DRIVE--3 HP BEAM LIFT--.5 HP

Great Condition 500 RPM Spindle speed 8 Head with jointers 1-13/16" Spindle Diameter, Belt Driven 2 bottom cutter heads with jointers-15HP/15HP 2 top cutter heads with jointers--20 HP/15HP 2 right hand cutter heads with jointers--10HP/10HP 1 left hand cutter head with jointer--10HP 1 universal cutter head--10HP

Manufacturer NV300 - With bilateral linear action providing profiling and straight knife grinding up to a max of 310 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 310 mm. Max dia of cutting circle 300 mm. Includes arbor, grinding wheel, stylus, 220 volt 3-phase

10x40 Triple Pass Drum Dryer Webb Dust Burner All piping and controls Cyclone Additional blower Airlock

Weeke BHC 750 CNC Router (2) Becker Vacuum Pumps

Weeke Optimat BHP008/Vantech 480 480 v This machine will be ready to move around November 10, 2022.

"X" Axis is 141.5" (3,595 mm), "Y" axis is 54.2" (1,378 mm), "Z" axis stroke is 9.8" (250 mm), Max. material thickness is 3.9" (100 mm). "X" Axis 197 FPM (60 MPM), "Y" axis 164 FPM (50 MPM), "Z" axis 49 FPM (15 MPM); Head travels on THK linear motion guides on all axes. (6) Tubeless K-Table support rails, (4) pneumatic panel lifters for heavy panels Pneumatic backstops, frontstops, & side stops create (2) working zones. Boring Unit, 4 HP (3.2 kW) Motor, variable speed from 1,500 - 7,500 RPM; (12) independent vertical drill spindles, (6) spindles in X-axis & (6) in Y-axis. (6) Horizontal spindles, (2 + 2) in X-axis & (1 + 1) in Y-axis; Grooving saw with 100 mm dia. saw blade. (1) 10 HP (7.5 kW) Air cooled electro spindle router, HSK-F63 adaptor; Powered by a frequency inverter w/programmable speed from 1,250 - 18,000 RPM, RH or LH rotation. NC Controlled C-axis for 360° horizontal processing; 8-position ride-along tool changer. (1) Becker 2.5 Kw Vacuum Pump, 2-zone safety mats (will stop machine if operator enters work area) & safety fences. - Listed specifications were taken from manufacturer's

Weeke BHX 055 Machining Center

Weeke BHC 350 7.5/9.0 kW HSK 63 liquid cooled router motor 6 position ATC 12 vertical boring spindles 6-way horizontal boring, x-axis grooving saw 6 support benches w/ 4 vacuum pods ea., 3 independent safety zones PC interface KVT 3.1 VACCUM PUMP

Weeke ABD 060 Bore & Dowel Machine This machine will be available in December 2023. - CNC DOWEL INSERTER FOR HORIZONTAL DRILLING AND DOWEL INSERTING - ENGINEERED TO SPRAY GLUE OR WATER - FEATURES A SORBTECH MAIN BEAM TO MINIMIZE VIBRATION - PNEUMATIC CONTROL OF CEBTER STOP AND RIGHT AND LEFT FENCES - OPEN END TABLE FOR MACHINING PARTS LONGER THAN 48” - VIBRATING HOPPER FOR AUTOMATIC FEEDING OF DOWELS - LARGER 17” DISPLAY AND WOODWOP PROGRAMMING - SERVO CONTROL OF DRILL HEIGHT AND DRILL DEPTH VIA PROGRAM - 3 INDEPENDENT SPINDLES ON 32MM CENTERS - BAR CODE READER

Weeke BHX 055 CNC Center