MATTEI BLADE 4 LX-TM-SE, 5 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (20.4 CFM @ 115 PSIG). RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 5 HP TEFC motor, 20.4 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

MATTEI BLADE 5 LX-TM-SE, 7.5 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (31.8 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bush on the back and now an oversized radial ball bearing on the front to address the side load created by the belts.MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 7.5 HP TEFC motor, 31.8 CFM @ 115 PSIG; full-voltage motor starter, air-cooled After Cooler. -- MAESTRO XB Controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 120-Gallon ASME Air Receiver Tank. -- Refrigerated Air Dryer. -- Pressure Gauge, Safety Valve, Filter, Oil Separator.

MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 10 HP TEFC motor, 39 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

MATTEI BLADE 11 LX-TM-SE, 15 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (65 CFM @ 115 PSIG).RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with "exclusive Meehanite® iron blades", designed to last 100,000 hours.Features: -- MATTEI "BLADE Series" Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 15 HP TEFC motor, 65 CFM @ 115 PSIG; full-voltage motor starter. -- Air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models. -- MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 120-Gallon ASME Air Receiver Tank. -- Refrigerated Air Dryer. -- Pressure Gauge, Safety Valve, Filter and Oil Separator.

MATTEI OPTIMA 30, 40 HP Variable-Speed Rotary Vane Compressor (89-189 CFM @ 102-145 PSIG)RELIABLE ROTARY VANE AIRENDSThe inverter adjusts the motor’s rotational speed, adapting the air delivered by the compressor to the actual air demand. OPTIMA can save up to 35% of the annual operating costs. Ideal for automotive, commercial and industrial applications.Features: -- MATTEI Optima Series Air Compressors quiet cabinet constant-duty Rotary Vane Compressors feature an inverter to match their operation to suit the load profile required by the compressed air system to ensure maximum energy savings under varying air demands.Equipped with: -- 40 HP TEFC motor, 89-189 CFM @ 102-145 PSIG; MaestroXS microprocessor control and protection system, AC inverter, premium efficient TEFC motors, quiet acoustic enclosure, air-cooled aftercooler, intelligent timed electronic condensate drain and separator kit and are filled with Mattei Rotoroil 8000 F2 synthetic oil; 2" NPT outlet.Includes: -- “W"; Version includes water-cooled oil and after cooler, add;...$ 1,463

MATTEI MNC 250 Refrigerated Air Dryer (250 SCFM).MNC Series non-cycling dryers run continuously and control the refrigerant gas to maintain dew point keeping your air system free of water. Theyare the most cost effective method for applications where the ambient temperature remains above freezing.Features: -- Simple Microprocessor-based control provides dew point, temperature, functionality monitoring and time drain control. -- Equipped with: -- Removable cabinet for easy access to internal components; moisture dewpoint indicator and automatic condensate drain. -- Nominal Cap. based on 100° F ambient temperature; 100° F inlet temperature; 100°F, inlet pressure 100 PSIG. -- Max. Ambient temperature: 122°F°; Max. inlet temperature 158°F; min. ambient temperature 41°F (5°C); max. inlet pressure 203 PSIG (14 Bar G). -- Includes: Refrigerant: R134A; 2" NPRT-F Connection. Also available in 230 volts, 1-Phase.For reliable operation and to meet warranty conditions, a prefilter must be installed. -- MF1-0339-1.5GNPT Prefilter add; ...$ 853, to be piped in front of the dryer. -- MF2-0339-1.5GNPT Afterfilter add; ...$ 853, to be piped after the dryer (prevents oil buildup in the tubes and keeps the condensate drain cleaner).

MATTEI BLADE 18 LX, 25 HP Direct-Drive Rotary Vane Compressor (112 CFM @ 116 PSIG)Direct-Drive Air Compressors combine legendary vane technology with traditional shaft-to-shaft coupling to provide industry leading performance at affordable prices. As quiet as 66 dB(A), all models turn at a slow 1,800 RPM. -- Equipped with: 25 HP Premium efficient TEFC motor; Wye-delta starter; quiet acoustic enclosure, 67 dB(A); air-cooled after cooler; protection system MaestroXS. -- Features: MAESTRO XB controller with expansion module allowing real time clock and daily/weekly programming, Continuous and Automatic operating modes with standard load/unload operation on all models, moisture separator & zero-loss electronic condensate drain (shipped loose); phase reversal protection; network ready. -- Includes: (3) Year parts warranty, (10) years on Air-End. Add Optional Refrigerated Air Dryer AC-300295

MATTEI BLADE 22i, 30 HP Direct-Drive VSD Rotary Vane Compressor (71 - 112 CFM @ 102 - 145 PSIG)Direct-Drive Air Compressors combine legendary vane technology with traditional shaft-to-shaft coupling to provide industry leading performance at affordable prices. As quiet as 66 dB(A), all models turn at a slow 1,800 RPM.Equipped with: -- 30 HP Premium efficient TEFC motor; VSD Drive; quiet acoustic enclosure, 67 dB(A); air-cooled after cooler; protection system MaestroXS. -- Features: -- MAESTRO XB controller with expansion module allowing real time clock and daily/weekly programming, Continuous and Automatic operating modes with standard load/unload operation on all models, moisture separator & zero-loss electronic condensate drain (shipped loose); phase reversal protection; network ready. -- Includes: -- (3) Year parts warranty, (10) years on Air-End.

MATTEI OPTIMA 45, 60HP Variable-Speed Rotary Vane Compressor (102-145 CFM @ 102-145 PSIG)RELIABLE ROTARY VANE AIRENDSThe inverter adjusts the motor’s rotational speed, adapting the air delivered by the compressor to the actual air demand. OPTIMA can save up to 35% of the annual operating costs. Ideal for automotive, commercial and industrial applications.Features: -- MATTEI Optima Series Air Compressors quiet cabinet constant-duty Rotary Vane Compressors feature an inverter to match their operation to suit the load profile required by the compressed air system to ensure maximum energy savings under varying air demands.Equipped with: -- 60 HP TEFC motor, 102-145 CFM @ 102-145 PSIG; MaestroXS microprocessor control and protection system, AC inverter, premium efficient TEFC motors, quiet acoustic enclosure, air-cooled After Cooler. -- Intelligent timed electronic condensate drain and separator kit and are filled with Mattei Rotoroil 8000 F2 synthetic oil; 2" NPT outlet.

MATTISON 69-42 MATTI-MAX Heavy Duty Automatic Rotary, high production Turning Lathe.Microprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor, 4" x 4" max. and 3/4" x 3/4" min. stock size. -- Drives & Speeds: Equipped with: 20 HP - 2,700 RPM Cutterhead Drive, 2-5/8" dia. arbor with variable speed, 2 - 45 RPM stock-rotational speed via 1.5 HP DC drive (reversing) & self-contained hydraulic unit for precise feed control.. -- Complete With: Automatic hopper feed; MATTI-MAX microprocessor-based PLC controller with keypad entry; machine functions & operations parameters are set directly from the control; RPM of workpiece and feed rate can be programmed to vary during the cut. Matching the feed rate to the stock-rotational speed produces an efficient cut -- Features: MATTI-MAX also allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. . Pneumatic tailstock with dual pressure to insure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings. -- Total electrical load 27 Amps.

MATTISON 404 Straight Line Rip Saw;Specifications: --25 HP - 3,600 RPM Direct drive arbor motor; --14" dia. max. saw blade cap. (9" smallest dia.), --1-1/2" dia. arbor; 4" thickness capacity. -- Table size 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. --Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. --Chain with automatic oil lubrication. -- 2 HP Feed motor with (4) feed speeds 62, 93, 124, & 186 FPM

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 20HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capy. -- Table size: 65" x 77" Long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication. -- 2 HP Feed motor with (2) feed speeds of 50 & 100 FPM. -- Laser light -- 480V to 240V Transformer -- Comes with some 12" 30 Tooth bladesNote : Seller claims the saw will give a glue line

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capacity. -- Table size of 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column; 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication. -- 2 HP Feed motor with (4) feed speeds. -- (2) Carbide rip blades.NOTE. Comes with a 208 Volt Transformer.

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capacity. -- Table size: 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication.. --4-Speed Feed: 62 - 93 - 124, & 186 FPM.

MATTISON - 202, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,400 RPM Saw arbor motor, 9" - 14" max. blade capacity, 1-1/2" diameter arbor, overhead arbor design. -- 4" Max. depth of cut, 13" min. stock length, 24" max. rip capacity to the right of the blade, 77" x 65" table size.Equipped with & Features: --Overhead holddown with: (6) Pressure rollers, (3) front and (3) back; 2 HP feed drive, (4) feed speeds of 56 - 84 - 112 & 168 FPM (fixed at 25 FPM ).

MAX - 36-SD, ...Double Disc SanderHeat treated and dynamically balanced 36" aluminum disc. -- Commercial duty; 5 HP motor base mounted with multiple drive belts. -- Heavy cast iron 16" x 46" table w/miter gauge slot. -- Easy precise tilting of the worktable with: 45° Forward &30° back. -- Rack & pinion adjustment of the table: Rise & fall; rack & pinion tilting of the table. -- Sanding station is mounted to (4) 3-1/2" heavy columns. -- Heavy bolt-down cast iron base.

MAX Spindle Sander VSI Made is USAOscillating Spindle Sander constructed for rugged use. -- 1 HP Motor drives and is connected through a flexible coupling, and can be installed or removed without disturbing the drive mechanism. -- Spindle speed 1,725 RPM, Oscillation speed 75 Cy/Min with 1-1/2" stroke length. -- Spindle quill runs in precision ball bearings, oscillated by a heavy duty worm & gear mechanism running in a bath of oil. -- (10) spindle sizes provided: 1/4 x 5", 3/8 x 6", 1/2 x 6", 5/8 x 6", 3/4 x 9", 1 x 9", 1 1/2 x 9", 2 x 9", 3 x 9" and 4 x 9"; 100 grit abrasive sanding sleeve with each spindle. -- Large 24" x 24" precision ground cast iron table mounted on large trunnions that can be tilted 45° down and 30° up by use of a convenient handwheel. -- Complete with: Pedestal style stand.

ORMA NPC/DIGIT 31/13 Hydraulic Hot Press (Oil Heated Platens)Main Features: -- Press platen dimension 3100 x 1300 mm (122" X 51") -- Max. total thrust 160 T (metric) - 352,000 Lbs -- Pressure over 80% of platen 5.0 Kg/cm² (71 PSI) -- Pressing cylinders (8) Ø 85 mm with 450 mm (17-3/4") stroke -- Movable platen lower (upstroke design) -- Opening 450 mm (17-3/4") -- Loading side 3100 mm (122") side Structure: -- Press structure in steel beams welded together on a precision jigs; locating surfaces are CNC tool machined -- The lower mobile platen and the upper fix platen structure are in beams welded on a precision jigs. -- Double rack and pinion system (both length and crosswise) to grant a perfect platens’ parallelism when the mobile one is moving up/downward. -- Movable platen locking system in order to work safely during the maintenance operations Hydraulic System: -- Hydraulic power unit (HAWE) composed by a double stage pump and a motor which are submersed in the hydraulic oil for a less noisiness and a better lubrication of the rotating parts. Closing stage (high delivery at low pressure) and thrusting stage (low delivery at high pressure). Both pumps are protected by a pressure relief valve. -- This system allows the use of lower consumption motors increasing the efficiency of the plant. -- Unit fitted with control and safety valves located in a group over the hydraulic oil tank lid -- The circuit comes filled with the necessary hydraulic oil to run the press. -- Rams are in steel suitable for hydraulic applications and are designed to work at the max pressure adjustable on the press. Electric System: -- Main control board (SIEMENS components) including: -- Dual timed press closing push buttons; press opening push button. -- Main on/off switch. -- Tension light. -- Emergency push button Operator control, touch screen panel, with: -- 7"; Digital display, SIEMENS "KTP700 BASIC COLOR" equipped with ETHERNET NET for remote assistance connection (it requires access to your Internet + Service pack) to set and control the following functions: -- Setting and display of the working pressure -- Setting and display of the working temperature (presses with electric heater) -- Setting and display of the pressing time for automatic opening -- Setting of the heating plant automatic switching on (presses with electric heater). Possibility of all week days settingpossibility to automatically set the partial use the power consumption of the boiler when it reaches the set temperature (for presses with

ORTON - TYPE F, ...Ship Shaper/RouterORTON Type "F" Ship Shaper/Router with: 40" x 60" Table Size. -- 5 HP - 230 Volt, 3-Phase. -- Oil Mist Lubrication. -- Machine "Completely Restored". -- Can be used as a Shaper or Router. -- Comes with: Mandrel with Top Bearing Attachment so the machine can be used as a Tilting Spindle Shaper. -- Also used as a Tilting Spindle Router with: Collet Chuck attachment with: 1" HSS spiral cutter and template guide. -- Heavy-Duty spindle with: BROWN & SHARPE "#11 Tapered Socket" in Spindle. -- Spindle tilts: 30° forward and 45° backward. -- Includes: BROOKS Frequency changer to increase 60-Cycles to 250-Cycles to increase speed of routers to 4,700 RPM. -- Great for cutting changing bevels. -- Approx. weight 3,000 Lbs. -- Lamp & cord NOT included. 5 HP - 230 Volts, 3-phase; in "Excellent Condition." Routers come with: 4 Ft x 14 ft table for clamping down work with patterns; also includes stands. Countertops. Great for cutting multiple pieces without tying up your CNC Router. Routers have been used in 1-Man Shop.

OSI SM-450 Side Matcher LineSide Matcher:FEATURES -- Directly opposing heads (Side-Matcher): Enhances width tolerance and eliminates pistol grip -- Guarantee machining accuracy of +/- 0.002"; (0.05 mm) on width and on tongue/groove position -- Through feed system in both machines: work boards as short as 9"; (229 mm) out of the defecting station; can be processed directly into the Side-Matcher -- Process twisted, crooked and bowed boards -- Hydro-lock collars on all axis -- Feed wheels on independent suspension -- Very low friction -- High precision spindle -- Very short setup time Easy and quick width adjustment -- Easy opening for tool replacement -- Hydraulic unjammingSpecifications: -- Pre-Milling top and bottom with (2) 15 HP motor -- Feed speed 200 to 450 FPM -- Board width 1 1/2" to 8" -- Board thickness: 1/2" to 1 1/2" -- Board length: minimum of 9" trough feed -- Tooling: (2) X 8", RPM 6,000 -- Spindle drive: (2) X 30 HP -- Feed wheels: (2) rows of (4) wheels on top driven by (2) 3 HP motors -- Feed rolls: (3) chromed rolls on bottom driven by (3) 2 HP motor -- Axis movement: on linear bearings