GENERAL - 30-225, ...15" x 6" Single-Sided PlanerSpecifications -- Planing thickness: 1/8 - 6"; min. stock length: 6-1/2"; max. depth of cut: 3 mm (0.12"). -- Table size: 14-1/2" W x 19" x 30-1/2" H. -- Cutterhead speed: 5,000 RPM; Feed speeds: 16 & 20 FPM. Equipped with: -- 3" Dia. 3-straight knife cutterhead; 3 HP Motor. -- Serrated spiral infeed & smooth solid steel outfeed rollers. -- Anti-kickback fingers & chip breaker. -- (2) In-table rollers. -- 16-1/2" W x 20-1/2" L Infeed & outfeed folding extensions. -- Built-in mobile base; pedal lock.Dimensions with infeed & outfeed tables extended: 61"; x 30"; x 48"; H.

GENERAL - 40-400, ...SINGLE SPINDLE SHAPERSpecifications: -- 7.5 HP Motor, 1-1/4" spindle. -- (4) Working speeds: 3,600 - 5,000 - 7,200 & 9,000 RPM. -- 5" Vertical spindle adjustment. -- Table dimensions: 30" x 36"; Distance in front of the spindle: 16-1/2"; table insert rings: 5-1/2" & 8-3/4"; split style adjustable fence.Includes: -- Push button magnetic switch & spindle reverse rotation switching. - Not included: Interchangeable spindles. -- Knives max. width cap.: 5".

GENERAL - 350 10", ...Tilting Arbor Table Saw with: 5 HP Motor & Rip FenceSpecifications: -- Table size: 20" LR x 28" FB x 34-1/2" H. -- Arbor dia. 5/8"; tilt 0° - 45° to right; blade speed: 4,000 RPM. -- Max. depth of cut: 3-1/8" at 90°; 2-1/8" at 45°; max. width of dado cut 13/16". -- Max. rip cap.: 52" Right.Equipped with: -- 8" Left & right table extensions. -- 5 HP Motor.Complete with: -- DELTA "Unifence Saw Guide"; 43" L x 3-1/2" H Rip Fence System. -- Blade Guard. -- Miter Gage.

GENERAL ELECTRIC - 9T, ...3-Phase TransformerSpecifications: -- 208 Volt secondary to 480 Volt primary; 45 KVA @ 150° C rise; 120 V neutral line; 60 Hz - 3 Ph; Type 2 enclosure. -- Includes: -- Fused disconnect.

GENERAL UP0-1028 2-Bag Portable Dust CollectorSpecifications: -- Cloth filter bag size 18" Dia. x 30" L, Cloth collector bag size 18" Dia. x 30" L. -- Inlet dia. 6", Outlet size 4-1/2" x 6"Equipped with: -- (4) Swivel casters.Complete with: -- 6" - 3-1/2" Dia. Dust Hose 3-Way Fitting.

GENERAL KINEMATICS Para-Mount II Single Deck Rectangular Vibratory Screener;Complete with the following features: --Model STM 96 X 20. --Carbon Steel. --Nominal screen size 96" wide x 20 long x 15" deep. --Designed for Trona mineral at a feed rate of 700 tons per hour at 80 pounds per cubic foot bulk density. --Driven by (2) 15 HP top mounted drives. --Current screen: Approximate 1" x 1" square openings. --Base mounted. --Overall dimensions: 290"L X 130"W X 90"H

GENOX V800 New Single Shaft ShredderIn Stock - Ready to Ship!Features: -- Shock Absorbing Gearbox that reduces stress on Drive Components -- 50 HP motor -- Hopper Opening - 59" x 56" -- Rotor Diameter - 15.75" -- Rotor Knives that can be used on four edges before replacement. -- Durable Counter Knives that adjust to maintain cutter clearance -- Quick Change Screens for accurate particle size control -- Segmented Shredding Chamber Floor with Brass Guides -- Twin Speed Hydraulics with an integrated air cooler -- Stand Alone Electrical Control Panel with Siemens PLC Control System -- Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

GENOX V600 New Single Shaft ShredderIn Stock - Ready to Ship!Features --Shock Absorbing Gearbox that reduces stress on Drive Components -- 25HP -- Hopper Opening - 48" x 43" -- Rotor Diameter - 9" --Rotor Knives that can be used on four edges before replacement. --Durable Counter Knives that adjust to maintain cutter clearance --Quick Change Screens for accurate particle size control --Segmented Shredding Chamber Floor with Brass Guides --Twin Speed Hydraulics with an integrated air cooler --Stand Alone Electrical Control Panel with Siemens PLC Control System --Tested, Approved and Certified to the applicable CE safety standardsTypical Applications --Plastics --Wood --Cable --Paper --Aluminum --Foam --Textile

DTX 680 - 24" BLADES" Alligator Shear --Description -- DTX 680 --Blade Length: 680mm --Cutting Force: 80 tons --Motor: 3 phase 220 V

DTX 340 - 14" BLADES" Alligator Shear Description -- DTX 340 --Blade Length: 14"; (340 mm) blades --4-sided reversible & regrindable --Lower blade in adjustable knife seat --Adjustable mechanical guard & adjustable jaw opening --Supplied with guard over cutting head --Foot pedal control

GIBEN KG-468-JKS EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications:Working Capacity: 0.4 - 3 mm Edge thickness capacity; minimum panel width 80 mm; minimal panel length 120 mm; panel thickness 10 - 60 mm adjustable feed speeds 10/15/20 MPM; motorized adjustment of the upper pressure beam. -- Equipped with: PREMELTING Glue System with: Quick change glue pot; top pot capacity 5 kG (11 Lbs); lower pot capacity 2 kG. -- Adjustable pressure roll section with: (1) Driven roller and (3) idler rollers.Workstations: -- 2-Motor Pre-milling Unit with independent adjustments. -- 2-Motor End Trimming Unit. -- Top & Bottom rough trim station. -- Top & Bottom radius fine trim station. -- 2-Motor Corner Rounding Unit. -- Top & Bottom profile scraping station. -- Top & Bottom flat scraping station. -- Top & Bottom Buffing station.Complete with & Features: -- "DELTA" PLC Control. -- Sound cabin for all workstations. -- Adjustable 700 mm outboard panel support. -- Actual Model is: GIBEN KG-468-JKS

GIBEN KG486JK EDGEBANDER (W/ PRE-MILL & CORNER ROUNDING): -- Specifications:Working Capacity 0.4 - 3 mm Edge thickness capacity. Minimum panel width 80 mm. Panel thickness 10 - 60 mm. Variable feed speeds 12 -20 MPM. Electronic adjustment of the upper pressure beam. -- Equipped with: PRE-MELTING GLUE SYSTEM With quick change glue pot (top pot capacity 5 kG / 11 Lbs), lower pot capacity 2 kG. -- Adjustable pressure roll section with (1) driven roller, and (3) idler rollers.Workstations: -- 2-Motor Pre-Milling Unit with independent adjustments. Diamond cutters included. -- 2-Motor End Trimming Unit. -- Top & bottom rough trim station. -- Top & bottom radius fine trim station. -- (4) Motor Corner Rounding Unit. -- Top and bottom edge scraping station -- (2) Top and bottom radius scraping stations, (1) for 1 mm & (1) for 3 mm. -- (2) Top & bottom Buffing stations for a super clean finish.Complete with & Features: -- "DELTA" Front-end "Touch Screen" Control. -- Cleaning/Release Agent sprayers at the front & back end of the machine. -- Sound cabin for all workstations. -- Adjustable outboard panel support. -- Actual Model is GIBEN KG486JK

GLOBAL BAGGER SYSTEMSpecifications: -- Support Structure 2" Tubular Steel -- Height 86 Inches -- Length 12 Feet -- Width top 60" and 90" Base -- Total Weight 1900 Lbs approx. -- Hopper Width 60" -- Hopper Length 106" -- Hopper Depth 44 " -- Capacity 3 Cu.Yards -- Hopper Conveyor Length 146 " -- Hopper Conveyor Width 25" -- Rubber Conveyor Belt 18" Wide -- Bag Clamp Air Operated -- Heat Sealer 24" capacity -- Bagging Capacity up to (200) Bags per HourOptions available, but not included; -- Weight Measure Scale -- Air Compressor -- Bag Stitching Machine -- One Year Warranty -- Loaded on your Truck

Gomad "DFDA-455" Sliding Table Single Spindle Shaper -- Specifications: 2 -1/64" (55 mm) spindle currently, 7.5 HP belt drive motor, (4) speeds 4,000/6,000/8,000 & 10,000 RPM, 3-9/16" spindle travel, 3/4" up to 2-11/64" dia. interchangeable spindle, reversing spindle rotation; heavy duty 36" x 40" cast iron table, (3) pneumatic clamps, double end fence, 4.5" dia. dust chute. -- Complete with: 13" wide sliding table, (4) Hold down springs, mounting collars & bolts, miter gauge with stop rod, and foot brake, capable of doing arch moulding work.NOTE: Great running condition before disconnect in 2013, currently stored in facility basement.

GOODSPEED HF 412 AO Vertical Oscillating Chair Back Sander Specifications: Table size 30” x 30” x 34-1/4” H. Equipped with: 12" W x 25" L Horizontal abrasive belt, with 12” H x 4” Dia. Aluminum & Spiral rubber drums, 12” H x 3-1/2” Dia. Spiral rubber feed drum, with 2 HP Motor & Variable feed speed control. 60 W Feed & Oscillation motors.

INTOREX TXA-1200 Automatic Hydraulic Copy Lathe;Specifications: -- 1,200 mm (47-1/4") Max. turning length, 210 mm (8-1/4") max. turning diameter. -- Max. turning dia. with standard steady 90 mm (3.5"). -- (2) Hydraulic copiers. -- Max. size of square stock for turning with automatic feed 100 mm (3.9"). -- (3) Tool holder turrets. Hopper feed unit. -- (8) Head speeds in a range from 750 - 5,500 RPM. -- 6 HP or 7.5 HP Headstock spindle motor. -- 4 HP Hydraulic pump motor.

GRAINMATIC - CP-960, ...2-Head Wide Belt Sander42" Width cap.; Drum, Platen.Head Configuration:1st Head: Spiral rubber covered contact roll, 7-7/8" dia., 20 HP motor.2nd Head: Combination Head, spiral rubber contact roll, and finishing platen; 15 HP motor.Specifications: -- 36" W x 75" L abrasive belts with air jet tracking. -- Motorized part thickness adjustment with keypad entry and LED readout; 0" - 7" opening. -- Infeed & outfeed spring loaded rubber covered holddown rolls. -- Feed Motor: 3.5 HP -- Variable feed speed: 15 - 60 FPM.Equipped with & Features: -- Infeed emergency stop bar. -- Disc brakes on sanding head motors. --12" Infeed load area. --Volt meters on sanding head motors.NOTE: Some specs need to be verified.

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP.Model: 62-40 HTFeed Opening: 55″ x 38″Outside Dimensions: 130″ x 61″ X 43″Power Unit Dimensions: 96″ x 86″ x 96″ Weight is 20,000 Lbs.Cutter Diameter: 20.5″ at HooksPower Unit Open Loop, Skid MountedElectrical Power 200 HP (2 x 100) Hydraulic Flow 156 GPM; Rated Pressure 3000 PSIOperator initiated pushbutton controls,featuring Allen Bradley PLC Motor controls include primary disconnectwith short circuit protection, full load contactors, and electronic overload detectionControl power is derived from a single-phase transformer.All components are assembled and wired in a NEMA enclosure Heavy Duty Discharge Conveyor and mezzanine Stand

GRANUTECH-SATURN - 62-40, ...Dual Shaft ShredderSpecifications: -- Motors: (2) 100 HP. -- Feed Opening: 62" x 40". -- Dual Shaft with independent Driven Shafts -- Includes: Feed conveyor & discharge conveyor, extra feed hopper; an extra pulley roller that is magnetized for exit end of discharge conveyor (current pulley roller in use is nonmagnetic). -- includes: (2) Service manuals and catwalk structure.

GRANUTECH-SATURN - GRIZZLY 80, ...Grinder Granulator Specifications: -- Rotor size: 77-1/2" -- Cutting diameter: 34-1/2" -- Main motor: 300 HP -- Speed: 321 RPM -- Number of knives: 50 -- Number of stationary knives: 10 -- Rotor type: STAREquipped with: -- Vibratory discharge conveyor -- Outfeed conveyor -- Crossbelt magnet -- Aspiration system -- Replaceable AR500 housing liners -- 3,500 sq/in. screening area -- Severe duty gearboxNOTE: New bed & fly knives on the machine, and new wear liners &new screens. Control panel will be completely rebuilt with a 500 Amp disconnect, a soft start and all the controls.