HYSTER H120XM 11,200 Lb. Cap. LPG Forklift Truck, with 3,690 Hours. (As of 7/18/24) & Spare Pair of ForksSpecifications: -- Max. height 4,450 mm (175.2"). -- Hour meter reading: 3,690 Hrs. (As of 7/18/24).Equipped with: -- 3-Stage Mast, with 5-3/4"; W x 72"; L x 30-3/4"; H Forks, Max. fork centers 44", & 55"; W x 46"; H Mast guard. -- 300-15/8.00 Front & 7.00-12/5.00 Rear Soild tires. -- Overhead guard with Headlights, & Tail Lights.Complete with: -- LPG Tank. -- Pair of 7-3/4"; W x 48"; L x 31"; H Spare Forks.NOTE: Forklift is not available for pick-up until 11/1/24.Dimensions of this Specific Forklift: 203" x 50" x 91" H.

HYSTER H80XM 8,000 Lb. Cap. LPG Forklift Truck, with 5,052 Hours (As of 7/18/24) & Side ShiftSpecifications: -- Max. height 4,710 mm (185.4"). -- Hour meter reading: 5,052 Hrs. (As of 7/18/24).Equipped with: -- 3-Stage Mast, with 7-3/4"; W x 48"; L x 24"; H Forks, Max. fork centers 41", & Mast guard. -- 250-15 Front & 7.00-12 Rear Soild tires. -- Overhead guard with Headlights, & Tail Lights.Complete with: -- HYDRA-SMOOTH "HS-100TP" Ride Control Kit. -- LPG Tank.

IMA ADVANTAGE 500 L EDGEBANDER (w/PREMILL & CORNER ROUNDING): -- Specifications:Edgebanding capacity: Coiled material: 0.3 - 3 mm (0.012 - 0.118"); strips 3.0 - 12.0 mm (0.118 - 0.472); panel thickness min./max. 8 - 60 mm (0.315 - 2.362").Equipped with:Pre-milling Unit: 4 kW x 2 (5.3 HP x 2) - 9,000 RPM Vertical joining spindles; SIKO digital readouts, and particle & debris air jet blower. -- Glue System - EVA (Hot Melt) with: "Quick-Lock" System. -- Pressure Section with: (1) Large dia. driven and (5) idle rollers. Workstations:End Trimming Unit: Dual motor, (2) 0.66 kW (0.88 HP) motors; suspended from the hold-down beam; automatic chamfer adjustment 0° - 8°. -- Rough Trimming Unit: Top & Bottom flush trimming, W 1.0 kW x 2 (1.34 HP x 2) - 12,000 RPM Ea. motor; against the feed (up milling), vertical & horizontal tracing wheels, digital readouts for adjustments. -- Contour Unit: Multiuse; Top & Bottom linear and vertical corner trimming; total motors: (4) 2 x 180 W and 2 x 400 W - 12,000 RPM. -- Profile Scraper Unit: Profile Scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing shoes. -- Glue Scraping Unit: Flat, Top & Bottom self-tracing Glue Scraper. -- Buffing Unit: Top & Bottom 0.18 kW x 4 (0.25 HP x 4) - 1,400 RPM. -- Edge Smoothing Unit: Top & Bottom for 1, 2 & 3 mm edge.Control System ICOS OPEN TS: Large color LCD display; displays stored data, on/off workstation sequence, troubleshooting diagnostic; data input by touchscreen, alphanumeric keyboard, and mouse. Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all holddown beam mounted workstations.Complete with:Heavy-Duty "sliding" feed chain with: 70 mm Wide x 60 mm long rubber pad inserts; central lubrication of transport chain; variable feed speed from 4 - 20 MPM (13 - 65 FPM). -- Motorized central height adjustment of top pressure beam with double V-belt hold-down. -- Sound Enclosure - All stations; all trimming & milling motors DC electrical motor brakes for immediate stopping. -- Spraying Units: Upfront at infeed for anti-stick solvent and polishing solvent prior to Buffing Station. -- Actual Model is I M A ADVANTAGE 500 L

IMA ADVANTAGE 500 L EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Production Edgebander -- Specifications:Edgebanding capacity: Coiled material 0.3 - 3 mm (0.012 - 0.118"); strips 3.0 - 12.0 mm (0.118 - 0.472); panel thickness min./max. 8 - 60 mm (0.315 - 2.362").Equipped With:Premill Unit - 08.379 with: 4 kW x 2 (5.3 HP x 2) 9,000 RPM Vertical joining spindles, SIKO digital readouts, particle & debris air jet blower. -- Glue System - EVA (Hot Melt) with: "Quick-Lock" System. -- Pressure Section with: (1) Large dia. driven and (5) idle rollers. Workstations:End Trimming Unit - 08.415: Dual motor, 0.66 kW x 2 (0.88 HP x 2) suspended from the hold-down beam; automatic chamfer adjustment 0° - 8°. -- Rough Trimming Unit - 08.055: Top & Bottom flush trimming, W 1.0 x 2 (HP 1.34 x 2) - 12,000 RPM ea. motor; against the feed (up-milling), vertical & horizontal tracing wheels, digital readouts for adjustments. -- Contour Unit - CT U-L: Multiuse, Top & Bottom linear and vertical corner trimming; total motors: (4) 2 x 180 W and 2 x 400 W; 12,000 RPM. -- Profile Scraper Unit - 08.519: Profile Scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing shoes. -- Glue Scraping Unit - 08.521: Flat, Top & Bottom self-tracing Glue Scraper. -- Buffing Unit - 08.617-2: Top & Bottom 0.18 kW x 4 (0.25 HP x 4) - 1,400 RPM. -- Edge Smoothing Unit: Top & Bottom for 1, 2 & 3 mm edge.Control System ICOS OPEN TS: Large color LCD display; displays stored data, on/off workstation sequence, troubleshooting diagnostic; data input by touchscreen, alphanumeric keyboard, and mouse. Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all hold-down beam mounted workstations.Complete with:Heavy-Duty "sliding" feed chain with: 70 mm Wide x 60 mm long rubber pad inserts; central lubrication of transport chain; variable feed speed from 4 - 20 MPM (13 - 65 FPM). -- Motorized central height adjustment of top pressure beam with double V-belt hold-down. -- Sound Enclosure - All stations; all trimming & milling motors DC electrical motor brakes for immediate stopping. -- Spraying Units: Upfront at infeed for anti-stick solvent and polishing solvent prior to Buffing Station. -- Actual Model is IMA ADVANTAGE 500 L

IMA - HKA EXPERT CONTOUR EDGEBANDER: Specifications: -- Manually operated Contour Edgebander. Designed for straight or curved (contour) edgebanding:0.5 - 3 mm Edgebanding thickness; 16 - 45 mm (0.63" - 1.77") panel & banding height; 23 - 45 mm (0.9" - 1.77") min. strip width; 100 mm (3.9") min. panel width; 250 mm (9.8") min. strip length. -- Equipped with: Versatile glue head that can be fixed to 1-side of the table to allow the operator to manually manipulate smaller pieces.During "fixed" mounted operation, coil material is drawn in automatically to infeed section of machine, via foot-pedal control. -- Work Table:32" (800 mm) Dia. coil dispensing table, large 813 x 914 mm (32" x 36") High-Flow Phenolic worktable surface;Pre-selection counter for edgebanding material; (1) preheating unit with 600 Watts for preheating of PVC/ABS edges -- Operating Process:Floating edgebanding head is clamped to panel to be processed, precut strip of edgebanding material is fed into glue head,Operator guides head around workpiece, glue is directly applied to precut strip of edgebanding material up to end of strip. -- Features: "Floating head (hot melt) glue pot" with 0.5 Liter cap; Guillotine knife for PVC material (within floating head). -- Complete with: &#9679 (1) 6 m³/Hr cap. vacuum pump for high-flow work table; &#9679 Jib Crane & hoist to support the edgebanding head; &#9679 Thermo-control for glue temperature; &#9679 Foot pedal control to initiate automatic cycle.

IMA - HKA CONTOUR EDGEBANDER: Specifications: -- Manually operated Contour Edgebander. -- Designed for straight or curved (contour) edgebanding with: 0.5 - 3 mm Edgebanding thickness, 16 - 45 mm panel & banding height, 23 - 45 mm min. strip width; 100 mm min. panel width; 250 mm min. strip length. -- Equipped with: Versatile glue head can be fixed to 1-side of the table allows operator to manually manipulate smaller pieces.During "fixed" mounted operation, coil material is drawn in automatically to infeed section of machine. -- Work Table:32" (800 mm) Dia. coil dispensing table, large worktable surface (approx. 36" x 36"); Pre-selection counter for edgebanding material; (1) preheating unit with 600 Watts for preheating of PVC/ABS edges -- Operating Process:Floating edgebanding head is clamped to panel to be processed, precut strip of edgebanding material is fed into glue head,Operator guides head around workpiece, glue is directly applied to precut strip of edgebanding material up to end of strip. -- Features: "Floating head/glue pot" unit (hot melt) with 0.5 Liter cap; Guillotine knife for PVC material (within floating head). -- Complete with: &#9679 (1) 6 m³/Hr cap. vacuum pump for high-flow work table; &#9679 Jib Crane & hoist to support the edgebanding head; &#9679 Thermo-control for glue temperature; &#9679 Foot pedal control to initiate automatic cycle.

IMA NOVIMAT CONCEPT/I/G80/440/L20 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications:Edgebanding capacity, 0.4 - 3 mm; (0.016 - 0.118") and solid wood strips up to 20 mm (0.787) thickness; Panel thickness min/max 10 - 60 mm (0.394 - 2.362") (min 10 - 40 mm (1.575") with contour trimming, max. 60 mm without contour trimming); Min Panel width 65 mm (2.559"), min panel length 150 mm (5.906"), edge length min. 250 mm (9.843") with material up to 3 mm; Feed speed 8 - 40 MPM (26.4 - 132 FPM).Equipped With: -- Indeed fence. Panel pre-heater (2) x 1,500 Watts. -- Pre-Milling Unit 08.0555 with KW 4.5 x 2 (HP 6 x 2) 9,000 RPM, vertical joining spindles, N.C. controlled, both w/jump movement and reversible rotation, SIKO digital readouts, particle & debris air jet blower. -- Spraying Unit, anti-sticking solvent (release agent), top bottom application. Between Pre-Mill and glue station. -- Coil magazine with HD guillotine, automatic coil changeover. Lot of vertical coil magazines. -- Glue System: EVA Glue (Hot Melt) Glue pot and Pre-melter with large capacity 30 Kg floor mounted hopper. -- Side Pressure Section: (1) driven and (5) idle rollers. N.C. controlled w/individual pneumatic pressure control for each rollWorkstations: -- End Trimming Unit: 08.42/30/B High speed, double motor 2 x KW 0.66 (HP 0.88) - 12,000 RPM. Horizontal model suspended from the hold-down beam, automatic chamfer adjustment 0° - 25° for speeds up to 32 MPM (105 FPM). -- Rough Trim: Unit 08.055. 1 KW (1.34 HP) - 12,000 RPM motors), Overlapped motor mounts, -- Multi-Function Unit (MFA) Radius and Chamfer milling Corner Rounding station Unit 08.348.. Controlled by N.C. with double automatic copying devices with 4+4 positions (total 8) for multiple edge thickness control, 0.66 kW (0.88 HP)- 12,000 RPM motors. -- Profile Edge Scraping Unit 08.519: Top & bottom, multi profile (4) positions N.C. controlled scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing wheels, digital readouts for adjustments, chip extraction system for scraping unit. -- Glue Scraping Unit 08521: Flat, top & bottom self-tracing glue scraper, N.C. controlled. -- Spray Nozzle top/bottom fir cleaning agent. -- Buffing Unit 08.617-2.: Top/bottom KW 0.18 (HP 0.25 x 2) - 1400 RPM ea. for buffing & polishing.Operator Interface: -- ICOS compact with the following features: Display color screen, floppy disk reader, keyboard, adjustable hanging control board. -- Sound-proof enclosure cabinet over all the working units with interior lights.

IBC TR-13-150 2-Ram Horizontal BalerSpecifications: -- Main Bore: 13" -- Eject Cylinder: 9" -- Horsepower: (2) 75 HP Each -- Feed Opening: 58" x 88"

INDIANA Model 12 Edge SanderDouble Sided, Non-oscillating Edge Sander with 48" x10" platens. -- 3 HP 220/440 Volt, 3 Phase Motor -- 56" X 10-3/4" Tilting Side Tables, 27" X 18"end Table, and Hand Wheel adjustment for table height. -- 9" belt capacity.This Heavy-Duty Sander has been Cleaned and Checked, and is available for immediate delivery!

INDUSTRIAL RESOURCES PASS ONE Pallet DismantlerRemove stringers with a single stroke and dismantle 400 plus pallets per shift with "one" operator. -- Machine size; 14' L x 5' W, table size 54" L x 60" W. Stringer cap. 54". -- Includes; Hydraulic power pack, 7.5 HP, 12 GPM @ 750 psi. Manual variable speed valving. Hydraulic cylinder 2" bore x 62" stroke. -- Options Include; Upper arm lift to provide ease of maintenance, greater flexibility, table rollers to help simplify pallet handling and 60" pallet length. -- Cycle time in / out approx. 7 Sec.

INGERSOLL-RAND UP6-15C-125 15 HP Single-Stage Horizontal Tank-Mounted Rotary Screw Air Compressor, with 2,313 Hrs. (as of 2/16/24)Specifications: -- Cap. 55 CFM, Max. pressure 125 PSI. -- Pump speed 6,250 RPM. -- Sound level 69 dBA. Equipped with: -- High efficiency close coupled air end. -- Motor shaft-mounted centrifugal blower. -- Electronic stepper motor inlet air control. -- 2-Stage Air-cooled aftercooler. -- Total positive lubrication system, with Spin-on filter. -- Compartmentalized sound enclosure.Complete with: -- 80 Gallon Cap. 24"; Dia. x 33"; L Horizontal Air Receiving Tank.

INGERSOLL RAND - UP6-15C-150, ...ROTARY SCREW AIR COMPRESSOR & Horizontal TankSpecifications: -- 15 HP Motor, 55 CFM @ 125 PSI; totally integrated package, single-stage rotary screw air-end; max. modulate pressure 125 PSI. -- Full sound enclosure keeps noise levels below 75 dBA. Standard Features Include: -- Instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control. -- Sealed SSR direct drive gear train; total positive lubrication system with spin-on filter. -- Mounted on horizontal tank.. (28,000) Total operating hours.

INGERSOLL RAND SSR-EP30SE Rotary Screw CompressorSpecifications: -- 30 HP Motor, approx. 120 CFM @ 125 PSI, totally integrated package, single stage rotary screw air end, max. modulate pressure 128 PSI; full sound enclosure keeps noise levels below 75 dBA.Features: -- "Intellisys" Microprocessor based control system, premium instrument panel, air-to-air 2-stage after-cooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter.Control system includes: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns.(23,069) Total operating hours.

INOTECH 200 HP DUAL BOX SHAVING MILLSpecifications for one system: -- (2) 100 HP Motors -- (2) Boxes 48" x 106" -- (2) Cutter Heads 48" Long with 10 Knives Each -- (2) Slide Out Modules for Maintenance of Knives Cutter Head -- Production Capacity up to 2,000 cu./ft. per hour -- In a Very Good Working Condition -- Loaded on your Truck(2) Complete Systems Available.Price is for one Unit unless otherwise stated.

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - AT-4843-850-60, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Opening size: 60" x 46" -- Main motor: 50 HPEquipped with: -- Control panel -- Oil Cooler: Air-Over-Oil -- 10' Bale Run-Out Table -- High temp/low oil level shutdown

INTERNATIONAL TITAN 6-EC Closed Door Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8"; -- Motor: 20 HP -- Cycle time: 32 Sec Cycle Time -- System pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Ram face pressure: 87 PSI -- Feed opening: 58"; x 35"; -- Bale size: 60"; x 48"; x 30"; Equipped with: -- Feed conveyor: 48" wide -- Programmable controller -- Ethernet connection

INTERNATIONAL TITAN-60-EC Full Eject Horizontal Baler with ConveyorSpecifications: -- Cylinder: 8" -- Main motor: 20 HP -- Feed opening: 58"; x 35"; -- Bale Size: 60"; x 48"; x 30"; -- Feed conveyor width: 48" -- Ram face pressure: 3,000 PSI -- Total force: 150,800 Lbs -- Cycle time: 32 Sec (14 Sec short stroke)Equipped with: -- Programmable controller with Ethernet -- Conveyor controls and conveyor hopper

INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler